Craftsmanship Details Define Premium Quality! Why Does Hanhua Vision Insist on Veneering HDF Below 40℃?

Blistering and delamination are common quality defects for veneered panels used in whole-house customization and high-end wall panel production. Many people wrongly believe these issues stem from poor adhesive or low-grade veneer materials. In reality, the substrate temperature before veneering is the key determining factor.

As a professional manufacturer of fiberboards and veneered panels, Hanhua Vision (Xiamen) New Material Technology Co., Ltd. follows strict production specifications. All high-density fiberboards (HDF) off the production line will be turned over for cooling and undergo 24 to 48 hours of conditioning. We keep the substrate temperature strictly within 25℃ – 40℃ before starting the veneering process.

Our Technical Director states: Veneering at a temperature above 40℃ will cause the adhesive layer to fail quickly and make PVC veneers deform from heat, which will eventually result in blistering. Controlling the board temperature below 40℃ enables full and even penetration of adhesive, creating perfectly smooth veneer surfaces. It also maximizes the board’s screw holding power and service life.

Supported by rigorous temperature control and precision glue application technology, we deliver quality products with exquisite craftsmanship. We sincerely welcome all customers to visit our factory and discuss cooperation for customized high-quality, eco-friendly veneered panels.